SFJ

Facebook  YouTube

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PDT

Central Oregon Locavore

CENTRAL OREGON LOCAVORE NEEDS YOUR HELP!

We at SFJ can relate.  Central Oregon Locavore is running a GoFundMe campaign, similar to our Kickstarter campaign earlier this year.  Follow the links to learn more about Locavore and to show your support.

www.centraloregonlocavore.org
www.gofundme.com/locavore

Central Oregon Locavore works for an ecologically stable and socially just food system in Central Oregon by improving access to fresh, nutrient-dense local food, educating the community about the benefits of sustainably produced food, and supporting farmers and ranchers.

Central Oregon Locavore is a non-profit. We count on community support in order to survive.

Today we have an urgent call for help. Because our previous lease expired in 2016, we were forced to move from our 1st St location to our new space on 3rd at Revere. This was a very large expense as we had to close the Marketplace for several weeks, remodel a dilapidated building and turn it into the lovely place it is today. Our exceptionally harsh winter resulted in high costs for snow removal and unusually low sales. Because of these things, we are now in difficult financial straits.

We need to raise $25,000 dollars this summer to keep the marketplace doors open.

Spotlight On: Equipment & Facilities

New Idea Mower

New Idea Mower

from issue:

For proper operation the outer end of the cutter bar should lead the inner end when the machine is not in operation. After long use the cutter bar may lag back and if this happens it can be corrected by making adjustments on the cutter bar eccentric bushing as follows: First making sure that the pin and bolt in the hinge casting “A” Fig. 5 are tight and in good condition.

Cockshutt Plow Found in Alberta

Cockshutt Plow Found in Alberta!

Dale Befus introduced me to a plow I had not set eyes on before, most unusual affair though Dale assures me not uncommon in Alberta, this implement is a beam-hung riding plow (wheels hang from the beam) as versus the frame-hung units (where the beam hangs under the wheel-supported frame).

SmP Hellmans Logging Equipment for Horse Traction

HELLMANS Logging Equipment for Horse Traction

The trials showed that lifting the log from the ground, either at the front and/or at the rear, by adapted equipment during the logging, has great benefits concerning the required tractive effort of the horse. Furthermore, it was found that wheeled equipment can be extremely advantageous, this not just for increasing the efficiency of the logging operation, but also for the horse’s comfort at work.

Barn Raising

Barn Raising

by:
from issue:

Here it was like a beehive with too many fuzzy cheeked teen-agers who couldn’t possibly be experienced enough to be of much help. But work was being accomplished; bents, end walls and partitions were being assembled like magic and raised into place with well-coordinated, effortless ease and precision. No tempers were flaring, no egomaniacs were trying to steal the show, and there was not the usual ten percent doing ninety percent of the work.

Horse Powered Snow Scoop

Horse Powered Snow Scoop

by:
from issue:

The scoop has two steel sides about 5 feet apart sitting on steel runners made out of heavy 2 X 2 angle iron, there is a blade that is lowered and raised by use of a foot release which allows the weight of the blade to lower it and then lock in the down position and the forward motion of the horses to raise it and lock it in the up position. This is accomplished by a clever pivoting action where the tongue attaches to the snow scoop.

Mowing with Scythes

Mowing with Scythes

by:
from issue:

Scythes were used extensively in Europe and North America until the early 20th century, after which they went out of favor as farm mechanization took off. However, the scythe is gaining new interest among small farmers in the West who want to mow grass on an acre or two, and could be a useful tool for farmers in the Tropics who do not have the resources to buy expensive mowing equipment.

Horsedrawn Plows and Plowing

Setting Up A Walking Plow

Here is a peek into the pages of Horsedrawn Plows and Plowing, written by SFJ editor and publisher Lynn R. Miller.

Work Bridle Styles

Work Bridle Styles

Here are fourteen work bridle styles taken from a 1920’s era harness catalog. Regional variants came with different names and configurations, so much so that we have elected to identify these images by letter instead of name so you may reference these pictures directly when ordering harness or talking about repairs or fit concerns with trainers or harness makers. In one region some were know as pigeon wing and others referred to them as batwing or mule bridles.

John Deere Corn Binder

John Deere Corn Binder

from issue:

The John Deere Corn Binder is set up as illustrated in the following pages. The darkened portions of the progressive illustrations show clearly the parts to be assembled and attached in proper order. Where the instructions or the connecting points are numbered, follow closely the order in which they are numbered and lettered. Arrows are also used to point out important adjustments or parts that need special attention in setting up.

McCormick-Deering Ensilage Cutter No 12B

McCormick-Deering Ensilage Cutter No. 12B

from issue:

IMPORTANT TO McCORMICK DEERING OWNERS: This pamphlet has been prepared and is furnished for the purpose of giving the user as much information as possible pertaining to the care and operation of this machine. The owner is urged to read and study this instruction pamphlet and if ordinary care is exercised, he will be assured of satisfactory service.

Champion No.4 Mower Reaper

The Champion No. 4 Combined Mower and Self-Raking Reaper

by:
from issue:

The project for the winter of 2010 was a Champion No. 4 mower made sometime around 1878 by the Champion Machine Works of Springfield, Ohio. The machine was designed primarily as a mower yet for an additional charge a reaping attachment could be added. The mower was in remarkably good condition for its age. After cleaning dirt from gears and oiling, we put the machine on blocks and found that none of the parts were frozen and everything moved.

Geiss New-Made Hay Loader

Gies’ New-Made Hayloader

by:
from issue:

I was sitting on a 5 gallon bucket staring at the hayloader. I had a significant amount of time and money invested. My wife, the great motivating influence in my life, walked up and asked what I was thinking. I was thinking about dropping the whole project and I told her so. She told me that it had better work since I had spent so much money and time on it already. She doesn’t talk that way very often so I figured I had better come up with a solution.

Horse Powered Snow Fencing and Sleigh Fencing

Horse Powered Snow Fencing and Sleigh Fencing

by:
from issue:

We were planning on having our cattle out in a sheltered field for the winter but a busy fall and early snows meant our usual fencing tool was going to be ineffective. Through the grazing season we use a reel barrow which allows us to carry posts and pay out or take in wire with a wheel barrow like device which works really well. But not on snow. This was the motivation for turning our sleigh into a “snow fencer” or a “sleigh barrow”.

400 Hen Laying House

400-Hen Laying House

by: ,
from issue:

One of the hardest problems in successful poultry keeping is to maintain the vigor and health of the flock. Housing has particular bearing on this problem. If the laying-house is poorly lighted, has insufficient ventilation, or is overcrowded, the health of the fowls will be affected. The purpose of housing is to increase productiveness. In order to accomplish this the fowls must be comfortable.

Blacksmith Forge Styles

Blacksmith Forge Styles

from issue:

Blacksmith Forge Styles circa 1920.

Farm Drum 27 Case 22 x 36 Threshing Machine

Farm Drum #27: Case 22 x 36 Threshing Machine

by:

Friend and Auctioneer Dennis Turmon has an upcoming auction featuring a Case Threshing machine, and we couldn’t wait when he invited us to take a look. On a blustery Central Oregon day (sorry about the wind noise), Lynn & Dennis take us on a guided tour of the Case 22×36 Thresher.

Is This Mower Worth Rebuilding

Is This Mower Worth Rebuilding?

If you are in a position to choose which make and model of mower you might wish to work on might I put in my vote for either the McD/Internationals #7 & #9 or the John Deere Big Four. These were the last and most plentiful models made and some parts are still available with a fair measure of aftermarket cutter bar parts which are interchangeable.

Small Farmer's Journal

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PDT