SFJ

Facebook  YouTube

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PST

Happy New Year from Small Farmers Journal
Happy New Year from Small Farmers Journal

The Small Farmer’s Journal hometown of Sisters, OR, was on the edge of the 2017 Solar Eclipse path of totality.

Spotlight On: Equipment & Facilities

Horse Powered Snow Scoop

Horse Powered Snow Scoop

by:
from issue:

The scoop has two steel sides about 5 feet apart sitting on steel runners made out of heavy 2 X 2 angle iron, there is a blade that is lowered and raised by use of a foot release which allows the weight of the blade to lower it and then lock in the down position and the forward motion of the horses to raise it and lock it in the up position. This is accomplished by a clever pivoting action where the tongue attaches to the snow scoop.

Bobsled Building Plans

Bobsled Building Plans

Here are two, old-style, heavy-duty, bobsled building plans featuring the sort of sleds you might have found in New England and the Maritime Provinces of Canada. (In fact you might get lucky and find them still.) These are designed to haul cord wood on the sled frame.

The Tip Cart

The Tip Cart

by:
from issue:

When horses were the main source of power on every farm, in the British Isles it was the tip-cart, rather than the wagon which was the most common vehicle, and for anyone farming with horses, it is still an extremely useful and versatile piece of equipment. The farm cart was used all over the country, indeed in some places wagons were scarcely used at all, and many small farms in other areas only used carts.

Hay Making with a Single Horse Part 2

Hay Making with a Single Horse Part 2

by:
from issue:

From reading the Small Farmers Journal, I knew that some people are equally happy with either model, but because McCormick Deering had gone to the trouble of developing the No. 9, it suggests they could see that there were improvements to be made on the No. 7. Even if the improvement was small, with a single horse any improvement was likely to increase my chance of success.

A Short History of the Horse-Drawn Mower

A Short History of the Horse-Drawn Mower

Book Excerpt: The enclosed gear, late model John Deere, Case, Oliver, David Bradley, and McCormick Deering International mowers I (we) are so fond of had a zenith of popular manufacture and use that lasted just short of 25 years. Millions of farmers with millions of mowers, built to have a serviceable life of 100 plus years, all pushed into the fence rows. I say, it was far too short of a period.

Box Jaw Tongs & the Cow Poop Theory of Blacksmithing

Box Jaw Tongs & the Cow Poop Theory of Blacksmithing

by:
from issue:

Making a pair of tongs was a milestone for a lot of blacksmiths. In times gone past a Journeyman Smith meant just that, a smith that went upon a journey to learn more skills before taking a masters test. When the smith appeared at the door of a prospective employer, he/she would be required to demonstrate their skills. A yard stick for this was to make a pair of tongs.

New Horse-drawn Side Delivery Rakes from Europe

New Horse-drawn Side Delivery Rakes from Europe

In Northern Italy the two agricultural machinery manufacturers MAINARDI A. s.r.l. and REPOSSI Macchine Agricole s.r.l. produce a vast range of haying equipment with pto and hydraulic drive, also hay rakes with mechanical drive by the rear wheels. The majority of the sold machines of this type are currently used with small tractors and motor cultivators. The technology of these rakes is based on implements which were developed in the 1940s, when animal traction still played an important role in Italy’s agriculture.

Amber Baker Letter

Hello from Michigan!

Dear Lynn Miller and staff, Hello from Michigan! We have only just started to read your Journal, and have really enjoyed it. First off, thank you for your publication. It is always a special occasion when the journal arrives, my favorite part would have to be when the seasoned farmer imparts some knowledge. Secondly, my dad is trying to figure out how to make a PTO forecart, but we are having difficulty finding information on people who have made their own, or what dimensions to make the cart out of and such.

Happs Plowing A Chance to Share

Happ’s Plowing: A Chance to Share

by:
from issue:

Dinnertime rolled around before we could get people and horses off the field so that results of judging could be announced. I learned a lot that day, one thing being that people were there to share; not many took the competition side of the competition very seriously. Don Anderson of Toledo, WA was our judge — with a tough job handed to him. Everyone was helping each other so he had to really stay on his toes to know who had done what on the various plots.

Horsedrawn Dempster Well Driller

Horsedrawn Dempster Well Driller

by:
from issue:

The driller is like an auger type post hole digger powered by one horse walking around the machine. The gear is stationary. The platform and everything on it (including operators) goes around and around with the horse. The auger shaft is clamped to the platform so the auger makes one revolution as the horse makes one revolution. The gears operate a winch. It appears the winch can also be cranked by hand.

John Deere Corn Binder

John Deere Corn Binder

from issue:

The John Deere Corn Binder is set up as illustrated in the following pages. The darkened portions of the progressive illustrations show clearly the parts to be assembled and attached in proper order. Where the instructions or the connecting points are numbered, follow closely the order in which they are numbered and lettered. Arrows are also used to point out important adjustments or parts that need special attention in setting up.

New Horsedrawn Minimum Till Seed Drill

New Horsedrawn Minimum Till Seed Drill

The physico-chemical degradation of the soils world-wide by so-called “conventional” farming methods is considered as one of the major problems for the world’s food supply in the coming decades. Organic farming systems, refraining from the use of genetic engineering and chemically-synthesized sprays and fertilizers, can help resolve this situation. However, a better protection of the soil is also closely linked to agricultural engineering. By that, minimum tillage or no-till seeding is gaining popularity among tractor farmers around the world.

New Buggy Gear Design

New Buggy Gear Design

by:
from issue:

As long back as most of us can remember, the plain people were using buggies for transportation. Buggy frames were mounted atop wood wheels that turned on large solid steel axles. Today, more new technology is available for buggies. Torsion axles, fiberglass and steel wheels, hydraulic disc brakes, LED lights, and sealed batteries — the list could continue.

Choosing a Gas or Coal Forge for the Small Farm Shop

Choosing a Gas or Coal Forge for the Small Farm Shop

by:
from issue:

After you’ve built a small farm blacksmith shop, one of the first decisions that you’ll need to make is which type of fuel you’ll be using. Most people choose either gas (propane) or coal, however, wood fired forges are also an option. All three fuel types have pros and cons. The final decision will likely be based on the type of forging that you plan to do and the local availability of the fuel.

McCormick-Deering Potato Digger

McCormick-Deering Potato Digger

from issue:

McCormick Deering (eventually International Harvestor) made what many believe to be one of the outstanding potato digger models. This post features the text and illustrations from the original manufacturer’s setup and operation literature, handed to the new owners upon purchase. This implement, pulled by two horses or a small suitable tractor, dug up the taters and conveyed them up an inclined, rattling chain which shook off most of the dirt and laid the crop on top of the ground for collection

The Use and Construction of Home Made Implements

The Use and Construction of Home Made Implements

by: ,
from issue:

It is now possible to purchase a make of machine to suit almost any condition if the money is available. There is no doubt that eventually they will be quite generally used. However, the dry farmers are at present hard pressed financially and in many instances the purchase of very much machinery is out of the question. For the man of small means or limited acreage, a homemade implement may be utilized at least temporarily.

Mini Horse Haying

Mini Horse Haying

by:
from issue:

The first mini I bought was a three year old gelding named Casper. He taught me a lot about what a 38 inch mini could do just by driving me around the neighborhood. He didn’t cover the miles fast, but he did get me there! It wasn’t long before several more 38 inch tall minis found their way home. I presently have four minis that are relatively quiet, responsive to the bit, and can work without a lot of drama.

Homemade Ground-Drive PTO Forecart

Homemade Ground-Drive PTO Forecart

by:
from issue:

As we start, consider a few things when building a pto cart. Are big drive tires necessary? Is a lot of weight needed? Imagine the cart in use. Try to see it working where you normally go and where you almost never go. Will it be safe and easy to mount or dismount? Can you access the controls of the implement conveniently? Is it easy to hook and unhook? Where is the balance point? I’m sure you will think of other details as you daydream about it.

Small Farmer's Journal

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PDT