The 18th century saw a tremendous interest in landscaping private parkland on a grand scale with the movement of entire hills and mature trees, all by man and horse power, to fulfill the designs of celebrated gardeners such as Capability Brown. In the mid 1800s the movement of mature trees was revolutionised by the introduction of the Barron tree transplanter. The first planter was designed and built by Barron for the transplantation of maturing trees at Elvaston Castle in Derbyshire.
Our friend, Mark Schwarzburg came by the office with an old wooden box he inherited from his great great great grandfather, Henry Schwarzburg. In it is a lovely, very old working wooden model of the stationary baler Henry helped to invent. Also were found, on old oil-skin paper, beautiful original engineer’s drawings for patent registry; and a brochure for the actual resulting manufactured implement.
Because of the many varieties and mixtures or fertilizer, it is impossible to give complete tables listing them. It is, however, very easy to determine the distribution of any particular fertilizer by proceeding as follows. Put a cloth, or some large sheets of paper under the machine and turn the main driving wheel 57 times for 7′, 51 times for 8′ and 46 times for 9′ machine. Weigh the amount ejected which will indicate the amount distributed per one-tenth of an acre.
As we start, consider a few things when building a pto cart. Are big drive tires necessary? Is a lot of weight needed? Imagine the cart in use. Try to see it working where you normally go and where you almost never go. Will it be safe and easy to mount or dismount? Can you access the controls of the implement conveniently? Is it easy to hook and unhook? Where is the balance point? I’m sure you will think of other details as you daydream about it.
A short piece on the construction of corncribs.
We were inspired to try no-tilling vegetables into cover crops after attending the Groffs’ field day in 1996. No-tilling warm season vegetables has proved problematic at our site due to the mulch of cover crop residues keeping the soil too cool and attracting slugs. We thought that no-tilling garlic into this cover crop of oats and Canadian field peas might be the ticket as garlic seems to appreciate being mulched.
When the milk has been poured into the supply can, and machine has attained its speed, the faucet should be fully opened. The milk will then flow through the regulating cover, down the feed tube and into the bowl, where separation of cream from the milk takes place. The skim milk passes from bowl to skim-milk cover and out into receiver; the cream enters cream cover, thence to receiver.
There is no fixed method of loading. The best results are usually obtained by starting to load at the front end, especially in long straw manure. To get good results do not pile any manure into the cylinders. The height of the load depends upon the condition of the manure, the condition and nature of the field. Do not put on extra side boards. Be satisfied with the capacity of the machine and do not abuse it. Overloading will be the cause of loss of time sooner or later.
As long back as most of us can remember, the plain people were using buggies for transportation. Buggy frames were mounted atop wood wheels that turned on large solid steel axles. Today, more new technology is available for buggies. Torsion axles, fiberglass and steel wheels, hydraulic disc brakes, LED lights, and sealed batteries — the list could continue.
Parts lists and illustrations are included in this comprehensive overview
When bolting the sections of elevator together be sure the upper trough ends overlap the upper trough ahead, and each lower trough is underneath the trough ahead, so the chains will slide smoothly. Bolt the short tie plates to the underside of troughs at the embossed holes in the middle of trough. When bolting on the head section, have the end of scroll sheet underneath the upper trough section. The lower cross plate in the head section must bolt on top of the return trough.
This information on Planet Jr. two horse equipment is from an old booklet which had been shared with us by Dave McCoy, a horse-logger from our parts: “Think of the saving made in cultivating perfectly two rows of potatoes, beans, corn or any crop planted in rows not over 44 inches apart, at a single passage. This means double work at a single cost, for the arrangement of the fourteen teeth is such that all the ground is well tilled and no open furrows are left next to the row, while one man attends easily to the work, with one team.”
Meanwhile, my senior year was approaching fast, and all of us students began to contemplate what our final project would be with a bit of urgency. Our capstone project tasks us with identifying a need for a product or solution, bringing that product through the design phase, then building that product and displaying at the Technical Exposition. So I had the harebrained idea to embark on recreating not only a scale model of Parker’s Pulverizer, but to also recreate the real thing in full-scale, complete with fresh new wheel castings.
IMPORTANT TO McCORMICK DEERING OWNERS: This pamphlet has been prepared and is furnished for the purpose of giving the user as much information as possible pertaining to the care and operation of this machine. The owner is urged to read and study this instruction pamphlet and if ordinary care is exercised, he will be assured of satisfactory service.
Moving beehives from one location to another is often a necessary step in apiary management. Commercial beekeepers routinely move large numbers of hives often during a season, to pollinate crops, avoid pesticide applications or to utilize specific honey flows. Beekeeping hobbyists may also move bees to distant honey flows or pollination sites, or to bring home a newly purchased hive.
Dinnertime rolled around before we could get people and horses off the field so that results of judging could be announced. I learned a lot that day, one thing being that people were there to share; not many took the competition side of the competition very seriously. Don Anderson of Toledo, WA was our judge — with a tough job handed to him. Everyone was helping each other so he had to really stay on his toes to know who had done what on the various plots.
A well thought out, functional barn should be the center piece of any farming endeavor, horse powered or fossil fueled, that involves livestock. After building and using two previous barns during our lifetimes, I think the one we now have has achieved a level of convenience, efficiency, and economy that is worth passing on.
The first wire we tried was a small gauge steel wire which was not terribly satisfactory with horses. Half the time they wouldn’t see it and would charge on through. And the other half of the time they would remember getting shocked by something they hadn’t seen there and would refuse to come through when we were standing there with gate wide open. We realized that visibility was an important consideration when working with horses.