Small Farmer's Journal

Facebook  YouTube

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PST

Spotlight On: Equipment & Facilities

John Deere No 12A Combine

John Deere No. 12-A Straight-Through Combine

from issue:

It is only natural for the owner of a new combine to want to try his machine as early as possible. This results in most new combines being started in the field before the crop is ready for combining. As soon as a binder is seen in the neighbor’s field, the urge to start becomes uncontrollable. When grain is ready for binding, it is not ready for straight combining.

The Magna Grecia Hoe

The Magna Grecia Hoe

by:
from issue:

Last spring I put a handle on a curious gardening tool I picked up at the FALCI company in Italy. Ashley, our 17-year-old (a seasoned gardener and enthusiastic digging fork user), was first to try it. She came back excitedly in a rather short time with a request: “Call to Italy right away and have them send us more of these.” “These” are the Magna Grecia hoes, popular in the Calabria region of South Italy but, interestingly, known in very few other places.

The Brabants Farm

The Brabants’ Farm

by:
from issue:

The Brabants’ Farm is a multi purpose farming operation whose main goal is to promote “horsefarming.” Our philosophy is to support the transformation of regional conventional agriculture and forestry into a sustainable, socially responsible, and less petroleum dependent based agriculture, by utilizing animal drawn technology (“horsefarming”), and by meeting key challenges in 21st century small scale agriculture and forestry in Colombia and throughout South America.

The Horsedrawn Mower Book

Removing the Wheels from a McCormick Deering No. 9 Mower

How to remove the wheels of a No. 9 McCormick Deering Mower, an excerpt from The Horsedrawn Mower Book.

John Deere Corn Binder

John Deere Corn Binder

from issue:

The John Deere Corn Binder is set up as illustrated in the following pages. The darkened portions of the progressive illustrations show clearly the parts to be assembled and attached in proper order. Where the instructions or the connecting points are numbered, follow closely the order in which they are numbered and lettered. Arrows are also used to point out important adjustments or parts that need special attention in setting up.

Step Ahead Horse Progress Days 2016

Step Ahead: 23rd Annual Horse Progress Days 2016

by:
from issue:

I had only been to Horse Progress Days once before, at Mount Hope, Ohio in 2008. It had been an eye-opener, showing how strong and in touch with sustainable farming values the Amish are, and how innovative and sensible their efforts could be. So at the 23rd annual event in Howe, Indiana, I was there partly looking for signs of continuity, and partly for signs of change. Right off I spotted an Amish man with a Blue Tooth in his ear, talking as he walked along.

Hay Making with a Single Horse Part 2

Hay Making with a Single Horse Part 2

by:
from issue:

From reading the Small Farmers Journal, I knew that some people are equally happy with either model, but because McCormick Deering had gone to the trouble of developing the No. 9, it suggests they could see that there were improvements to be made on the No. 7. Even if the improvement was small, with a single horse any improvement was likely to increase my chance of success.

Farm Drum 27 Case 22 x 36 Threshing Machine

Farm Drum #27: Case 22 x 36 Threshing Machine

by:

Friend and Auctioneer Dennis Turmon has an upcoming auction featuring a Case Threshing machine, and we couldn’t wait when he invited us to take a look. On a blustery Central Oregon day (sorry about the wind noise), Lynn & Dennis take us on a guided tour of the Case 22×36 Thresher.

400 Hen Laying House

400-Hen Laying House

by: ,
from issue:

One of the hardest problems in successful poultry keeping is to maintain the vigor and health of the flock. Housing has particular bearing on this problem. If the laying-house is poorly lighted, has insufficient ventilation, or is overcrowded, the health of the fowls will be affected. The purpose of housing is to increase productiveness. In order to accomplish this the fowls must be comfortable.

Sleds

Sleds

by:
from issue:

The remainder of this section on Agricultural Implements is about homemade equipment for use with draft animals. These implements are all proven and serviceable. They are easily worked by a single animal weighing 1,000 pounds, and probably a good deal less. Sleds rate high on our homestead. They can be pulled over rough terrain. They do well traversing slopes. Being low to the ground, they are very easy to load up.

McCormick-Deering Ensilage Cutter No 12B

McCormick-Deering Ensilage Cutter No. 12B

from issue:

IMPORTANT TO McCORMICK DEERING OWNERS: This pamphlet has been prepared and is furnished for the purpose of giving the user as much information as possible pertaining to the care and operation of this machine. The owner is urged to read and study this instruction pamphlet and if ordinary care is exercised, he will be assured of satisfactory service.

Farm Drum 25 Two-Way Plow

Farm Drum #25: Two-Way Plow

by:

Lynn Miller and Ed Joseph discuss the merits of the two-way plow, what to look for when considering purchase, and a little bit of the history of this unique IH / P&O model.

Building an Inexpensive Pole Barn

Building an Inexpensive Pole Barn

by:
from issue:

The inside of the barn can be partitioned into stalls of whatever size we need, using portable panels secured to the upright posts that support the roof. We have a lot of flexibility in use for this barn, making several large aisles or a number of smaller stalls. We can take the panels out or move them to the side for cleaning the barn with a tractor, or for using the barn the rest of the year for machinery.

Box Jaw Tongs & the Cow Poop Theory of Blacksmithing

Box Jaw Tongs & the Cow Poop Theory of Blacksmithing

by:
from issue:

Making a pair of tongs was a milestone for a lot of blacksmiths. In times gone past a Journeyman Smith meant just that, a smith that went upon a journey to learn more skills before taking a masters test. When the smith appeared at the door of a prospective employer, he/she would be required to demonstrate their skills. A yard stick for this was to make a pair of tongs.

Living With Horses

Living With Horses

by:
from issue:

The French breed of Ardennes is closer to what the breed has been in the past. The Ardennes has always been a stockier type of horse, rude as its environment. Today the breed has dramatically changed into a real heavy horse. If the Ardennes had an average weight between 550 and 700kg in the first part of the last century, the balance shows today 1000kg and more. Thus the difference between the Ardennes and their “big” sisters, the Brabants in Belgium, or the Trait du Nord in France, has gone.

New Horse-drawn Side Delivery Rakes from Europe

New Horse-drawn Side Delivery Rakes from Europe

In Northern Italy the two agricultural machinery manufacturers MAINARDI A. s.r.l. and REPOSSI Macchine Agricole s.r.l. produce a vast range of haying equipment with pto and hydraulic drive, also hay rakes with mechanical drive by the rear wheels. The majority of the sold machines of this type are currently used with small tractors and motor cultivators. The technology of these rakes is based on implements which were developed in the 1940s, when animal traction still played an important role in Italy’s agriculture.

Work Bridle Styles

Work Bridle Styles

Here are fourteen work bridle styles taken from a 1920’s era harness catalog. Regional variants came with different names and configurations, so much so that we have elected to identify these images by letter instead of name so you may reference these pictures directly when ordering harness or talking about repairs or fit concerns with trainers or harness makers. In one region some were know as pigeon wing and others referred to them as batwing or mule bridles.

International Harvester Fertilizer Distributor

International Harvester Fertilizer Distributor

from issue:

Because of the many varieties and mixtures or fertilizer, it is impossible to give complete tables listing them. It is, however, very easy to determine the distribution of any particular fertilizer by proceeding as follows. Put a cloth, or some large sheets of paper under the machine and turn the main driving wheel 57 times for 7′, 51 times for 8′ and 46 times for 9′ machine. Weigh the amount ejected which will indicate the amount distributed per one-tenth of an acre.

Small Farmer's Journal

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PDT