The wear of the shoe is caused much less by the weight of the animal’s body than by the rubbing which takes place between the shoe and the earth whenever the foot is placed to the ground and lifted. The wear of the shoe which occurs when the foot is placed on the ground is termed “grounding wear,” and that which occurs while the foot is being lifted from the ground is termed “swinging-off wear.” When a horse travels normally, both kinds of wear are nearly alike, but are very distinct when the paces are abnormal, especially when there is faulty direction of the limbs.
On the Gies farmstead we occasionally wallow in goat milk. From it we make our own butter, yogurt and cheese as well as drink some. This has prompted me to build a little cheese press to help with the extra milk. The press is made from inexpensive 1/2 inch thick plastic cutting boards used for the top and bottom plates and pressure disks, white pvc pipe, and a plastic floor drain cap.
One of the most important requirements is disc blade concavity, that is, correct concavity. Further along we set forth the purposes of disc concavity. We feel it is important enough to devote the extra time and words in a discussion of the subject, because seldom is disc concavity talked about, and very few know that there is difference enough to cause good and bad work.
Fabricating steel rings is a common task in my small farm blacksmith shop. They are often used on tie-rings for my customer’s barns, chain latches on gates, neck yoke rings, etc. It’s simple enough to create a ring over the horn of the anvil or with the use of a bending fork, however, if you want to create multiple rings of the same diameter it’s worthwhile to build a hardy bending jig.
We have hesitated to go public with our potting mix, not because the formula is top secret, but because our greenhouse experience is limited in years and scale. Nevertheless, we would like to offer what we have learned in hopes of showing that something as seemingly insignificant as putting together a potting mix can be integrated into a systems approach to farming.
Good barn doors, ones that will last a lifetime of opening, sliding and swinging in the wind, require careful design and construction. In 1946 the Starline Co., a barn building firm from the midwestern US, compiled a book of barn plans. These two diagrams were in that book and presented excellent information.
The arch was built on a small trailer axle that I cut down to 3 feet wide and tacked back together. This was done so that I could keep the wheels parallel. I cut the middle out after construction was complete. I used heavy wall pipe from my scrounge pile for the various frame parts. It is topped off with an angle iron bar for added strength and to provide a mount for the winch and some slots for extra chains.
According to the size of the horse and his hoofs the nails should be driven from five-eighths to an inch and five-eighths high, and as even as possible. As soon as a nail is driven its point should be immediately bent down towards the shoe in order to prevent injuries. The heads of all the nails should then be gone over with a hammer and driven down solidly into the nail-holes, the hoof being meanwhile supported in the left hand.
This is the story of a harrow on a budget. I saw plans on the Tillers International website for building an adjustable spike tooth harrow. I modified the plans somewhat to suit the materials I had available and built a functional farm tool for eighteen dollars. The manufactured equivalent would have cost at least $300.
On the Anatomy of Thrift is an instructional series Farmrun created with Farmstead Meatsmith. Their principal intention is instruction in the matters of traditional pork processing. In a broader and more honest context, OAT is a deeply philosophical manifesto on the subject of eating animals. Fat & Salt is the third and final video in the series. It is the conceptual conclusion to the illustrated, narrated story that weaves throughout the entire series, and deals instructionally in the matters of preserving pork.
The first step was to decide on an appropriate chassis, or “running gear.” Eventually I chose to go with the real deal, a wooden-wheeled gear with leaf springs rather than pneumatic tires. Wooden wheels last forever with care and are functional and look the part. I bought an antique delivery wagon that had been left outdoors as an ornament. I was able to reuse some of the wheels and wooden parts of the running gear.
Within so-called alternative agriculture circles there are turf wars abrew
One of the challenges I constantly face using draft ponies is finding appropriately sized equipment. Mya is a Shetland-Welsh cross, standing at 11.2 hands. Most manure spreaders are big and heavy and require a team of horses. I needed something small and light and preferably wheeled to minimize impact to the land. My husband and I looked around our budding small farm for something light, wheeled, cheap, and available, and we quickly noticed our Vermont-style garden cart.
Lightning-protection systems for buildings give lightning ready-made lines of low resistance. They do this by providing unbroken bodies of material that have lower resistance than any other in the immediate neighborhood. A protection system routes lightning along a known, controlled course between the air and the moist earth. Well-installed and maintained, a lightning-protection system will route lightning with over 90-percent effectiveness.
It is difficult to accurately measure a horse’s neck without fitting. In other words, there are so many variables involved in the shape and size of a horse’s neck that the only accurate and easy way to size the neck is to use several collars and put them on one at a time until fitting is found.
Heretofore potato production in this country has been conducted along extensive rather than intensive lines. In other words, we have been satisfied to plant twice as many acres as should have been necessary to produce a sufficient quantity of potatoes for our food requirements. Present economic conditions compel the grower to consider more seriously the desirability of reducing the cost of production by increasing the yield per acre.