The illustrations on these pages come from an old J.I. Case catalog loaned to us by Judson Schrick of Decorah, Iowa. We reprint them here for you because, as in the past, there have been those of us who have been able to make good use of this information when we go to repair or restore one of these plows or whatever. For many of us, there is no other place to go for this kind of information but right here in the good old SFJ. Some of you already have this stuff in your shop library. Some of you don’t like this stuff and will never need it. Hope both of you will tolerate the rest of us as we go on preserving some great relic technologies. Remember, tractors may come and tractors may go but good horses are born, every day
Adjust the hitch down until the heel of the landside rests flat on the bottom of the furrow. The hitch should always be set as high as possible so that the plow will take the ground quickly, but care should be taken to see that the heel of landside runs flat in bottom of furrow. In case the plow has a tendency to run on its nose, the hitch should be lowered slightly until the heel of the landside runs flat in the bottom of the furrow. The position of the draft bars in a sidewise direction should be maintained by moving the hitch adjusting bar out as the bar is tilted downward.
Friend and Auctioneer Dennis Turmon has an upcoming auction featuring a Case Threshing machine, and we couldn’t wait when he invited us to take a look. On a blustery Central Oregon day (sorry about the wind noise), Lynn & Dennis take us on a guided tour of the Case 22×36 Thresher.