The foundation of the circular beater is a cold-rolled, steel shaft securely fastened at each end of the rear of the spreader box. This shaft does not revolve, but forms a sort of a curved axle on which the beater revolves. The great advantage of the circular beater is that it spreads more than twice its own width — away beyond the wheels on each side. The circular beater is imitated as closely as the patents allow but none of the imitations will give you the positive, uniform, wide, even spread of the Fearless.
Check the adjustments on your spreader and make sure they are in proper operating condition. Hitch your team to the empty spreader to limber it up and see that it is working properly before loading. If you will turn the beaters over by hand before starting to the field, the spreader will start easier and will prevent throwing out a large bunch of manure when starting.
There is no fixed method of loading. The best results are usually obtained by starting to load at the front end, especially in long straw manure. To get good results do not pile any manure into the cylinders. The height of the load depends upon the condition of the manure, the condition and nature of the field. Do not put on extra side boards. Be satisfied with the capacity of the machine and do not abuse it. Overloading will be the cause of loss of time sooner or later.
To select a Model 8, 10 or 10A for rebuilding, if you have a few to choose from – All New Idea spreaders have the raised words New Idea, Coldwater, Ohio on the bull gear. The No. 8 is being rebuilt in many areas due to the shortage of 10A’s and because they are still very popular. The 10A is the most recent of the spreaders and all three can be rebuilt. The 10 and 10A are the most popular for rebuilding as parts are available for putting these spreaders back into use.
We have in our archives this interesting and informative booklet on a manure spreader from circa 1900. We have reproduced the whole pages for you to give a complete picture of how good a job of selling these old companies did, especially when it came to the presentation of real engineering advancement. Hope you enjoy it.