The Ox Corner Fall 2008

The Ox Corner – Fall 2008

produced by Tim Huppe of Farmington, NH

The Ox Corner Fall 2008
Girthing chain.

Girthing Chain

If you are browsing through an antique store or walking through an old barn, keep your eyes open for this unique item. It is likely that many were in use in years past but were discarded because those that had them did not know their function.

Butchers and official weigh masters used them, cattle dealers, drovers, and operators of fattening operations used them. There were few weight scales large enough to weigh cattle in the early days. Feed manufacturers had not yet begun handing out cattle weight tapes. So, if you wanted to measure the girth of a bovine, you used a girthing chain. Measuring the girth gave a fair approximation of the animal’s weight.

The chain is nine feet long. It is made of brass or steel jeweler’s chain. In line in the chain is small round or oval brass tabs stamped with numbers five through nine. At the beginning of the chain there is a small wire ring which the person held while unraveling the chain.

The first brass tab is at five feet, and of course, it is stamped with a five. There is a tab each foot thereafter with corresponding numbered tabs up to nine. Half way between each numbered tab there is an extra link affixed to the chain indicating the half foot.

Just like the weight tapes we use today, the chain is wrapped around the girth of the ox directly behind the front legs. With the zero ring in hand, the other end is brought up around snug to the aligning point on the chain. The old saying goes that ‘how snug the chain was pulled depended on if you were buying or selling.’

A six foot ox weighed approximately 1,000 pounds and an eight foot ox weighed 1,900 pounds. After, the chains were usually wrapped around a wood thread spool to keep from tangling. These chains were well cared for by their owners.

Many of the stories written about the ox teams of old refer to them in feet. Now you know that it is girth and not height that they are talking about.

If you come across one of these chains and are lucky enough to become the owner of it, take good care with it. With the transfer of ownership of these chains there is often a good story that goes with it.

The Ox Corner Fall 2008
Training horn knobs.

Brass Horn Training Knobs

It is rare that a team of oxen naturally have horns that match one another. Teamsters often use various methods to manage the growth of a horn. The most common method is to use horn weights to pull the horn downward.

The training knob pictured below had two uses. The mounting of the knob is quite simple. The knob is placed over the tip of the horn and the small bolt threaded into the knob is tightened against the horn.

One application for this unique knob was to pull horns together. The knobs are mounted on the horns with the eyelets facing inward. Piano wire is fastened to the eyelets and strung across the front of the forehead. The wires are fastened to a turnbuckle. As the horn was pulled inward, the turnbuckle was tightened. It was left in place until horns were the desired shape.. Piano wire was used, because it broke easily if the ox got tangled up.

Another application for the knob is to turn the horn upward.

A teamster choosing to use a head yoke or attempting to lift a horn from eye level or simply likes the look of turned-up horns, would use this knob.

The knob is mounted on the horn with the eyelets turned upward. The ox is tied into its stall. On the ceiling, pulleys are hung. Small stranded wire or light rope is tied to the knobs, run up and over the pulley and down to a weight. The pulley system allows the ox to move its head all the while with a continuous upward pull.

This method requires constant attention from the caregiver, due to its complex nature.

The Ox Corner Fall 2008
Ray Ludwig plowing with a nice team of Devon oxen May 2004.

Ray Ludwig

For forty years the New England 4-H Youth Working Steer program has been turning out accomplished teamsters. Young men and women who have been taught the age old skills of raising, training, and working cattle have gone on to become farmers using draft animals, competitors in oxen competitions, and often times leaders of the very clubs they grew up in.

But, club leaders will tell you that the lessons learned in the program go far beyond the cattle. The responsibility of caring for animals every day, being willing to set time aside for training sessions on a regular schedule, and patience and humility needed when working with animals, are some of these lessons. The road to success is not often a smooth one, and winning and losing in the show ring prepares us for life.

The hardworking and dedicated leaders of a variety of 4-H programs across the nation consistently put the kids and the family first.

Ray Ludwig of Tolland, Connecticut, is a classic example of a good 4-H leader. Eighty-one year old Ray began training cattle 50 years ago. He and his wife, Jean, raised a family on their small farm. Steers and oxen have provided the traction power on the farm these many years.

For years I had been hearing great things about the work Ray was doing with his cattle. While reading an early issue of Small Farmer’s Journal, I came across a photo of a man mowing hay with a handsome team of mature Milking Devon oxen. The man was on the seat of an oxen-drawn sickle bar mower. There was no teamster guiding the team from the front. This got my attention. Reading the article gave me a greater insight into the accomplishments of the teamster, none other than Ray Ludwig.

Ray uses his cattle for twitching and scooting logs and firewood. He works his garden, plowing, harrowing and cultivating. Mowing hay and cart work are among the other tasks that oxen provide power for on the farm. Ray owns a tractor, but uses it primarily for bucket work like moving snow.

In 1974, when Ray and Jean began the working steer club, it was in response to a growing interest from young people and their families to learn what Ray could teach them. Well, teach them he did and did it well. Founders and leaders of the Connecticut Whiplash Teamsters for over 35 years, they touched and improved the quality of many lives.

Their club was very active. They competed at fairs, historical sites like Hancock Shaker Village, and consistently took top honors at the plowing match held at the Billings Farm Museum in Woodstock, Vermont. For many years the Connecticut teamsters competing at the Eastern States Exposition have been a force to be reckoned with.

Ray has always been willing to share his knowledge and several years ago took that to the highest level. He authored a superb manual on the training and use of oxen. The work titled, The Pride and Joy of Working Cattle, has chapters filled with valuable information, including how to make twisted whips, lashes, ox yokes, and more. Everyone with an interest in oxen should read this fine work.

This last September, it was my pleasure to attend and contribute my time to the Northeast Animal Power Field Days in Tunbridge, Vermont. Ray and Jean brought a nice pair of three-year old Milking Devon cattle to the event, where they participated in equipment demonstrations.

Ray, Terri Chamberlain, Howard Van Ord, and myself, had the opportunity to share what we know about working cattle with those attending the roundtable discussions.

What an honor it was for me to share information with a man who has held the bar so high and who I consider one of the finest trainers of working cattle alive today.

The Ox Corner Fall 2008
“Largest Oxen in the World.” Right: Mt. Katahdin and Left: Granger, their combined weight 9800 pounds. Bred and owned by Mr. A.S. Rand, of Stetson, Maine.
The Ox Corner Fall 2008
Gentleman with mature pair of Devon oxen. Willimantic, Connecticut.
The Ox Corner Fall 2008
Shoeing the Oxen, Seattle 1906.

In 1852, Ezra Meeker (older gentleman on left) with wife and child made the journey from Iowa to Oregon by ox team. In 1906, Meeker with team of oxen pulling a prairie schooner, set out to travel from Washington state to Washington, DC. With one companion and a faithful dog, Meeker arrived at his destination two years later. The purpose of the trip was to induce people to mark the famous old Oregon Trail Highway. The picture above is one of his oxen being re-shod.

(This information is from Ox Teams on the Oregon Trail by Ezra Meeker, Pioneer Life Series. I highly recommend this book.)