SFJ

Facebook  YouTube

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PDT

Woodstove Cookery at Home on the Range

Below is a lovely labeled illustration of a wood-fire cookstove, and a list of important cookstove tools pulled from the pages of Woodstove Cookery: At Home On The Range. Woodstove Cookery is an authoritative text on all aspects of the wood stove, and includes dozens of recipes tailored for wood stove cooking.

If you are interested in learning more about the wood stove, Woodstove Cookery is a guide for the beginner and a master class for the wood stove veteran.

Woodstove Cookery at Home on the Range

Woodstove Cookery at Home on the Range

Woodstove Cookery at Home on the Range

Spotlight On: How-To & Plans

Horseshoeing Part 2C

Horseshoeing Part 2C

The wear of the shoe is caused much less by the weight of the animal’s body than by the rubbing which takes place between the shoe and the earth whenever the foot is placed to the ground and lifted. The wear of the shoe which occurs when the foot is placed on the ground is termed “grounding wear,” and that which occurs while the foot is being lifted from the ground is termed “swinging-off wear.” When a horse travels normally, both kinds of wear are nearly alike, but are very distinct when the paces are abnormal, especially when there is faulty direction of the limbs.

An Efficient, Economical Barn

by:
from issue:

A well thought out, functional barn should be the center piece of any farming endeavor, horse powered or fossil fueled, that involves livestock. After building and using two previous barns during our lifetimes, I think the one we now have has achieved a level of convenience, efficiency, and economy that is worth passing on.

Choosing a Gas or Coal Forge for the Small Farm Shop

Choosing a Gas or Coal Forge for the Small Farm Shop

by:
from issue:

After you’ve built a small farm blacksmith shop, one of the first decisions that you’ll need to make is which type of fuel you’ll be using. Most people choose either gas (propane) or coal, however, wood fired forges are also an option. All three fuel types have pros and cons. The final decision will likely be based on the type of forging that you plan to do and the local availability of the fuel.

A Horse Powered Round Bale Unroller

A Horse Powered Round Bale Unroller

by:
from issue:

We had experimented with unrolling the bales the year before and had decided to make a device that would let us move them with the horses and then unroll them. I used square tubing to make a simple frame with two arms attached to a cross piece which connected to a tongue. Small diagonal braces made the arrangement rigid and the arms had a right angle piece of square tubing on their ends which allowed a pin to be driven into the middle of the round bale from each side.

On The Anatomy of Thrift Fat & Slat

On the Anatomy of Thrift Part 3: Fat & Salt

On the Anatomy of Thrift is an instructional series Farmrun created with Farmstead Meatsmith. Their principal intention is instruction in the matters of traditional pork processing. In a broader and more honest context, OAT is a deeply philosophical manifesto on the subject of eating animals. Fat & Salt is the third and final video in the series. It is the conceptual conclusion to the illustrated, narrated story that weaves throughout the entire series, and deals instructionally in the matters of preserving pork.

Eighteen Dollar Harrow

Eighteen Dollar Harrow

by:
from issue:

This is the story of a harrow on a budget. I saw plans on the Tillers International website for building an adjustable spike tooth harrow. I modified the plans somewhat to suit the materials I had available and built a functional farm tool for eighteen dollars. The manufactured equivalent would have cost at least $300.

Multiple Hitching with One Set of Lines

Multiple Hitching with One Set of Lines

by:
from issue:

A great deal of interest has been shown the last several years in using multiple hitches in horse farming, especially in spring fieldwork. The question often asked is how to keep it simple and easy in driving and assembling the hitch as far as lines are concerned. We demonstrated our method at the Horse Progress Days at Mt. Hope, Ohio in 2003 and have been asked numerous times how we drove four, six and eight-horse hitches using only two lines.

Horseshoeing Part 2B

Horseshoeing Part 2B

If we observe horses moving unrestrained over level ground, we will notice differences in the carriage of the feet. Many deviations in the line of flight of hoofs and in the manner in which they are set to the ground occur; for example, horses heavily burdened or pulling heavy loads, and, therefore, not having free use of their limbs, project their limbs irregularly and meet the ground first with the toe; however, careful observation will detect the presence of one or the other of these lines of flight of the foot.

Horse Powered Snow Fencing and Sleigh Fencing

Horse Powered Snow Fencing and Sleigh Fencing

by:
from issue:

We were planning on having our cattle out in a sheltered field for the winter but a busy fall and early snows meant our usual fencing tool was going to be ineffective. Through the grazing season we use a reel barrow which allows us to carry posts and pay out or take in wire with a wheel barrow like device which works really well. But not on snow. This was the motivation for turning our sleigh into a “snow fencer” or a “sleigh barrow”.

Farm Drum #30 Blacksmithing we Pete Cecil Basic Techniques

Farm Drum #30: Blacksmithing with Pete Cecil – Basic Techniques

Pete Cecil demonstrates basic blacksmithing techniques through crafting a hook in the forge.

Disc Harrow Requirements

Disc Harrow Requirements

by:
from issue:

One of the most important requirements is disc blade concavity, that is, correct concavity. Further along we set forth the purposes of disc concavity. We feel it is important enough to devote the extra time and words in a discussion of the subject, because seldom is disc concavity talked about, and very few know that there is difference enough to cause good and bad work.

How To Get Into Farming With No Money

How To Get Into Farming With No Money

by:
from issue:

Let’s assume the beginning ‘farmer’ has absolutely nothing. Nothing but a will to farm and a reasonably normal body. The very first thing you must do is search out a farmer, preferably a farmer who farms close to the way that you want to farm. You must watch him, ask questions, do as you are told and learn everything you can. Very shortly you will be on your own and you will find that the more you learn now, the better you will be when you have only yourself to rely on.

A Pony-Powered Garden Cart

A Pony-Powered Garden Cart

by:
from issue:

One of the challenges I constantly face using draft ponies is finding appropriately sized equipment. Mya is a Shetland-Welsh cross, standing at 11.2 hands. Most manure spreaders are big and heavy and require a team of horses. I needed something small and light and preferably wheeled to minimize impact to the land. My husband and I looked around our budding small farm for something light, wheeled, cheap, and available, and we quickly noticed our Vermont-style garden cart.

Building a Community, Building a Barn

Building a Community, Building a Barn

by:
from issue:

One of the most striking aspects of this development is the strength and confidence that comes from this communal way of living. While it is impressive to build a barn in a day it seems even more impressive to imagine building four barns or six, and all the rest of the needs of a community. For these young Amish families the vision of a shared agricultural community is strong, and clear.

Build Your Own Butter Churn

Build Your Own Butter Churn

by:
from issue:

Fresh butter melting on hot homemade bread… Isn’t that the homesteader’s dream? A cheap two-gallon stock pot from the local chain store got me started in churn building. It was thin stainless steel and cost less than ten bucks. I carted it home wondering what I might find in my junk pile to run the thing. I found an old squirrel cage fan and pulled the little motor to test it. I figure that if it could turn a six-inch fan, it could turn a two-inch impeller.

Portable A-Frame

Portable A-Frame

by:
from issue:

These portable A-frames can be used for lots of lifting projects. Decades ago, when I was horselogging on the coast I used something similar to this to load my short logger truck. Great homemade tool.

Book Review Butchering

Two New Butchering Volumes

Danforth’s BUTCHERING is an unqualified MASTERPIECE! One which actually gives me hope for the furtherance of human kind and the ripening of good farming everywhere because, in no small part, of this young author’s sensitive comprehension of the modern disconnect with food, feeding ourselves, and farming.

Barn Raising

Barn Raising

by:
from issue:

Here it was like a beehive with too many fuzzy cheeked teen-agers who couldn’t possibly be experienced enough to be of much help. But work was being accomplished; bents, end walls and partitions were being assembled like magic and raised into place with well-coordinated, effortless ease and precision. No tempers were flaring, no egomaniacs were trying to steal the show, and there was not the usual ten percent doing ninety percent of the work.

Small Farmer's Journal

Small Farmer's Journal
PO Box 1627
Sisters, Oregon 97759
800-876-2893
541-549-2064
agrarian@smallfarmersjournal.com
Mon - Thu, 8am - 4pm PDT